Faqs

Welcome to Faqs for Netgear Routers….

  1. How to connect a Netgear 150 router?

The input to the Netgear 150 can be done via a LAN cable or via the Wi-Fi protocol. The connection via the LAN port does not require additional settings or data. To connect via Wi-Fi, the default address is 192.168.1.1. This value is relevant for new devices and all routers that have not been reconfigured during network connection by other specialists. Typically, most employees of different Internet providers change these values ​​in order to increase the security of the modem.

  1. How to configure the Netgear N150 router if there is no cable near the hand and the address has been changed?

To solve this problem, it is necessary to reset the router settings by pressing the special Reset button. It is located on the backside near the power button. If the connection to the router is successful, an authorization window should appear. The default username is “admin”, and the password is “password”. If it turns out that this data is incorrect and you do not know the user name, use the reset button.

  1. How to configure PPPoE protocol for the Netgear Router?

The PPPoE protocol is configured for various providers. At the moment this is one of the most common connection protocols. Along with this, it is also one of the simplest modes of operation, where you only need to specify a user name and password. Additional settings for this mode are not required. This type of connection is implemented as follows:

  • in the “new settings” tab it is necessary to find the field “Do you need to enter connection information when connecting to the Internet” and select “Yes”;

  • the user name and password must also be written in the contract. Otherwise, you can get this information from technical support;

  • The static and dynamic IP settings proceed in the standard mode.

  • After setting these parameters, the router is ready for use.

  1. How to configure a Netgear WNR1000 router?

This device is set up in the standard mode. The interface of this model is similar in many respects to the model N300, the whole configuration proceeds in the same mode. Here you can find the function of changing the factory password, which is used to improve the security of the device. Configuring the Netgear WNR1000 router requires the following security settings: WPA2 PSK AES. Then you need to enable SSID broadcasting, enter a name, and select a channel in the drop-down menu (44) and mode up to 866 megabit. All other configuration parameters use the default values.

  1. Which Feature of Netgear router allows you to access all your files from anywhere?

With the NETGEAR Ready CLOUD USB Access application, you can access and share secures personal cloud storage files. After connecting the USB drive to the NETGEAR router and copying your favorite files to it, you can enjoy the convenience and the same features as with Google Drive ™ and Drop box, only without payment, speed limits and privacy issues. Now, using the Ready CLOUD mobile application or web portal, you can use your USB storage device at home at any time and from different places … it’s that simple!

  1. How to change the password on the Netgear N150 router?

  • Select the WPA2-PSK protocol (AES), the recommended Netgear,

  • In the next paragraph “Security Settings” (You can also read more about the encryption methods used for the wireless network).

  • Next, come up with a password and enter it in the appropriate field “Password phrase”. This will give you a password-protected wireless connection.

  1. How to disable WPS on a Netgear N150 router?

Click the WPS button on the side of the device, or the soft button in the router settings via the browser, and the router will continue to work in an unprotected mode.

  1. What preliminary preparation needs to be done before the configuration of the router?

To start connecting the n300 to the Internet, you need to perform a number of preliminary operations:

  • Connect the power supply to the back panel and plug the device into the network; Insert the WAN cable and connect the PC with the second commuting cable (inserted into one of the five dedicated ports);

  • Press the power button, which is moved to the front panel of this model.

  • After these manipulations, indicator lights should indicate that a device is turned on in one of the ports and the power cord is connected to the router, which means:

  • you can proceed to the program setting. It starts with the automatic receipt of IP and DNS addresses by the router.

  • To do this, we need to get into the settings panel of the wired and wireless network adapter.

  1. How to set up Wi-Fi connection for the Netgear router?

To connect a Wi-Fi network for Netgear model, follow these steps:

  • Open the item from the menu on the left “Wi-Fi-net”;

  • A new window opens: in the line with the name, set the name for your wireless connection;

  • Channel selection can be left automatic, and you can set your own value if there are many other wireless networks around;

  • The connection mode should allow up to 300 Mbit / s; In the security settings,

  • select the last selector (the most advanced type of encryption);

  • In the area for entering the password, enter our key, which must contain numbers and letters (preferably in different registers);

  • Apply the changes and try to enter any website via Wi-Fi.

  1. How to update the firmware?

To continue to be able to connect the router without problems to the Internet, you need to install the latest version of the software, that is, to reflash the device. This is done in several stages:

  • The first step is to enter the official website of the manufacturer and download the latest version of the firmware

  • Disconnect the device’s Internet cable, but leave the one that connects it to the computer;

  • Enter the device settings menu, click on the firmware number in the page header;

  • Select the update file on the computer by clicking on the Browse button;

  • Download, we wait until the router reboots and we can go back into the settings;

  • Download from the official site or from the disk configuration file;

  • Select the item “Manage settings” in the router menu, then “Restore settings”;

  • We download the necessary file from the computer and wait for its installation. After that, try to go back to the settings page, and then insert the WAN cable (Internet) and enter any site. If everything works, congratulations! You managed to connect the Internet to the Netgear router yourself.

  1. What if I am not able to configure my device correctly even after following same steps?

If something went wrong, you can return the settings to the factory settings. To do this, the Reset button is located on the rear panel of the device, and after holding it you have to wait 10-15 seconds. After let go and wait until the device starts. After that, you can again try to configure the Internet and update the firmware.

  1. I have bought a model Netgear N150. Please help me to connect it properly.

  • To connect the Netgear n 150 router to the Internet independently, you will need a cable provided by your ISP and a socket for connecting the device to the 220 V network.

  • First, attach the power adapter to the back of the router and plug the other end into a wall outlet, then press the power button.

  • At the same time, the power indicator on the front panel of the Netgear should light up. As soon as it glows with an even green color, the router is ready for use.

  • Next, plug the Internet cable into the yellow connector on the back of the device. If necessary, you can connect a printer, a fixed computer, or an external data bank to the other 4 connectors

  • To configure the router first, you must connect the device to the computer using a network cable. At the same time, the LED corresponding to the LAN connector on the indicator panel should light up.