how to connect hp printer to wifi

October 22, 2021October 22, 2021routerLeave a comment

How to connect an HP printer to a Netgear router?

A user can connect an HP printer to a Netgear router either through a wired connection using an Ethernet cable or through a wireless connection using the WPS connection method. Before connecting an HP printer to the Netgear router using a WPS connection, you have to make sure that the router supports the WPS connection. New users are being recommended to choose a wired connection for the connection process to avoid sudden disconnection while printing any documents.

Here are the conditions that must meet to connect an HP printer to a Netgear router using a WPS connection

Both the Netgear router and HP printer must support the WPS connection method.
The Wireless Netgear router with which you are connecting the HP printer should have a physical WPS push button.
The router’s network must use WPS or WPA2 security. A wireless connection won’t get established if there is no security in the network.
A Netgear router may not get connected if you are applying the default Wireless settings and has no Wi-fi security in the network.

Steps to connect an HP printer to a Netgear router through a WPS connection

Locate the WPS (Wi-fi protection setup) button on the HP printer.
Press the WPS button on the printer.
Note: You can find instructions regarding the WPS connection from the Printer’s manual guide.
Now press the WPS button on the Netgear router within 2 minutes
Wait for a few minutes until the connection gets established.
When the signal LED of the router turns green, it means it is connected to the HP printer.

Re.rockspace.local extender setup

Note: If a user fails in pressing the WPS button of the router within 2 minutes, the connection won’t get established. You need to perform the process again to create a successful connection. Make sure you are fulfilling all the requirements to create a WPS connection between an HP printer and a Netgear router.

Netgear nighthawk ac2600 setup – routerlogin.net

September 7, 2021September 7, 2021routerLeave a comment

How to set up Netgear nighthawk ac2600 a Pro Gaming router in your home?

The setup process of the Netgear AC2600 Nighthawk Pro Gaming Router is not a difficult task as the user can easily perform the process with the help of the instructions provided by the manual Guide of the device. The setup process is an initial method to install these devices in your home. To perform the Netgear Router setup, the user must be acquainted with all the prerequisites required to perform this process.

Steps to setup Netgear AC2600 Nighthawk Pro Gaming Router

Plug out all the wires connecting the modem to your system.
Connect the Power Adapter of the modem to an available power switch. Make sure the power switch to which you are connected to the router is at enough distance from which your router could receive an ideal amount of Wi-Fi signal.
Now, use an Ethernet Cable to connect your modem to the router. Connect one end to the modem to the computer in which you are going to operate the Internet and the other end to the yellow internet port of the router.
Take an Ethernet cable and make a connection between your system and the router. Connect one end of your cable to the computer and another end into the LAN ports of the router.
Plugin the power adapter of your Netgear router to the Power outlet.
Now, you have to press the power button located on the rear panel of the device. As soon as the power LED of your router gets solid green, your router will get successfully turned on. Until or unless the Power LED of your router doesn’t turn on, you won’t be able to operate your Netgear Router.

Note: Before performing the Netgear Router setup process, a user has to make sure that he has all the prerequisites that are required during the setup process. Choose an ideal spot for your router to allow your device to receive sufficient Wi-Fi signals.

Netgear AC1200 router Setup- Routerlogin.net

August 16, 2021August 16, 2021routerLeave a comment

Netgear AC1200 router Setup – Routerlogin.net

How to set up a Netgear AC1200 router in a local network?

A user must keep the Quick Start guide along with him during the setup process, instructions regarding the connection process will be given on that guide. There is a sticker that came along with your router, you are going to require it during the setup process. You can also note down the default Wireless settings that are given on that card. A user requires the default Wireless credentials when he for the first time connects to the router’s network.

Steps to setup a Netgear AC1200 router in a local network

To start the setup process, plug in the power adapter of the modem to an electric outlet.
Connect your router and modem using an Ethernet cable. Join one end of the cable at the back of your modem and the other end to the Internet port of your router.
To turn on the device, press the Power button on the back panel of your Netgear AC1200 router.
Wait for a few seconds until the three LEDs ( Power LED, Wi-fi LED, Status LED) turn solid green.
When your router successfully turns on, you can connect it to your computer.
Move on to your computer, open the Wi-fi settings and search for the available Wi-fi networks.
Select the Network name that was given on the card that came along with the router.
Enter the default Wi-fi password given on the sticker in the provided field. Click on the Connect button.
Once you are connected to the router’s network the routerlogin.net configuration page appears on the screen.
You need to assign a login password on the new password field and retype it on the Confirm password field.
Select the security questions that you want to assign for the password recovery process.

Note: In the future, if a user forgets the login password of the Netgear router login window, he can recover it using the recovery process.

Click on the Next button
The next window will show that you are successfully connected to the Internet. Click on the Next to move on to the further step.
It takes you to the Firmware update page. If a new firmware is found, it will notify you of it.
Click on the yes button to start the upgrade process. It may take a few minutes.
On the next page, you can customize the Wireless settings of the network. You can bring adjustments in Wi-fi name, Wi-fi password, Security options, and SSID broadcast.
Users must assign a different name to each of the Wi-fi bands of the Netgear router.
To secure the network, users are recommended to disable the SSID broadcast of the router’s network.
Make sure the Wi-fi password is different from the admin password of the Netgear AC1200 router.Click on the Next button when you are done.
The summary page appears on the screen allowing you to review the settings you did.
Click on the Finish button and the router starts the reboot process to apply the settings you made.

Note: Users are recommended to assign easy security questions so that during the recovery process, one can easily guess their answers. If a user is unable to answer the security questions, he has to restore the default settings to the router. When the reset process is done, you can type the default login password i.e “admin” on the password field of the routerlogin.net login window.

Netgear cm1000 setup – Routerlogin.net

July 2, 2021July 2, 2021routerLeave a comment

How to change the login password of the Netgear cm1000 modem?

Just like a router is controlled and managed by its web interface, a user can also manage his modem through the web interface of his Netgear modem. Users having the login password can interact and change the settings of a Netgear modem. To prevent the entry of unwanted users in the web interface of a Netgear modem, a user has to assign a strong login password. A user can change the login password of his Netgear C1000 modem anytime using the web interface of the modem.

Steps to change the default password of the Netgear cm1000 modem

To change the login password of the Netgear cm1000 modem, open a web browser on the computer attached to the modem of which you are changing the login password.
Go to the address bar of your browser and type the LAN IP address of your Netgear cm1000 modem. The IP address of a Netgear cm1000 modem is 192.168.100.1
Hit the enter button and you will be redirected to the Netgear modem login window.
Enter the login credentials within the respective fields of the login window. Enter the “admin” as the default username and type the password you typed earlier to login to the main Netgear modem window. Be careful while typing down the credentials, both the login fields are case-sensitive.
After mentioning the credentials, click on the login button and you will be redirected to the main default window of the Netgear cm1000 modem
Go to the Advanced tab, select the Administration option then click on the Set Password tab
As soon as you click on the Set Password tab, the page appears on the screen.
Scroll down to the set password page and type the current login password on the old password field. Type the password that you want to set for your Netgear Modem in the Set password field. Repeat the password in the new password field.
When you are done typing the password in their respective fields, click on the Apply button and the settings you configured will get applied.

Note: While assigning a new login password to the Netgear modem login window, make sure to fulfill all the eligibility criterias required to assign a password to a Netgear cm1000 modem. Password should be strong enough to keep the unwanted users away from accessing and controlling your modem.

How to reboot your Netgear cm1000 modem using the web interface of your device?

The reboot process is utilized to refresh your device and is mostly done after adding a new function or upgrading an existing feature on your modem device. The process disconnects all computers and the wireless devices connected to the local network of your Netgear modem. After the reboot process, your modem reestablishes the connection with your network, and the devices connected to the network get reconnected.

Steps to reboot your Netgear cm1000 modem through its web interface

Open a browser on your computer connected to the Ethernet cable with a modem or to a Wi-fi router that is attached to a modem with an Ethernet cable.
Go to the address bar of your browser and type the LAN IP address of your Netgear cm1000 modem as the URL of a browser. The IP address of a Netgear cm1000 modem is 192.168.100.1
Hit the enter button and you will be redirected to the Netgear modem login window.
Enter the login credentials within the respective fields of the login window. Enter the “admin” as the default username and type the password you typed earlier to login to the main Netgear modem window. Be careful while typing down the credentials, both the login fields are case-sensitive.
After mentioning the credentials, click on the login button and you will be redirected to the main default window of the Netgear cm1000 modem
From the main navigation panel go to the Advanced tab and the cable information page gets displayed on your screen.
As soon as the Advance information page appears on the screen, scroll down the page and locate the Reboot button. When you find the reboot button, click on it, and the confirmation message displays on your screen.
You will be prompted to click on the Ok button to reboot your Netgear modem, as soon as you hit the ok button the Netgear modem automatically reboots.

Note: A user can also perform the reboot process of the Netgear cm 1000 modem through a manual process with the power button located on the front panel of your device. A user must know the LAN IP address of a modem before interacting with its web interface. Without the LAN IP address of a Netgear cm 1000 modem, no user can be able to interact with the web management of his device. You can also google the IP address of a Netgear modem on any mobile device connected to a Wi-fi connection.

mywifiext local | Netgear Extender Setup

June 2, 2021June 2, 2021routerLeave a comment

mywifiext local – Netgear Extender Setup

There are several options with which a user can interact with his Netgear Wi-fi extender. If a user is using his computer to operate or configure his extender, he can interact with the Netgear Wi-fi extender using the mywifiext.net interface. If a user wants to interact or configure his Netgear Extender remotely, he can use the mobile device to do it. With the help of the Netgear Genie, a user can access the various settings of his Netgear Wi-fi extender from any corner of the world.

connect to my Netgear Wi-fi extender

device, make sure you have downloaded the Netgear genie app from the app store of your device

To connect to your Netgear extender, first, you need to open a web browser on your mobile device or computer connected to the network of your Netgear Extender.
Go to the URL of your browser and type www.mywifiext.net on the address bar of the browser and hit the enter button. In case you encounter any kind of error while interacting with the default Netgear Extender login window, you can also type the LAN IP address of your range extender on the URL of the browser.
The LAN IP address of the Netgear Range extender is 192.168.1.1 or 192.168.1.254
As soon as you hit the enter button the login window of mywifiext.net appears on the screen.
Mention the login credentials within their respective fields, type “admin” on the username field, and mention the admin password that you typed earlier while logging in to the web interface of the mywifiext.net window. In case you haven’t changed the default password type “password” as the default credential on the password tab.
Both the login fields are case-sensitive, make sure you are holding the shift key while you want to type an alphabet in a capital one and release the shift key when you want to type an alphabet in a small one.
After mentioning the credentials on the Netgear Extender login window, click on the login button and the browser will redirect you to the default home page window.
From the main navigation panel of the mywifiext.net window, you can view or adjust various kinds of settings within the Netgear Wi-fi extender.

Note: If it’s the first time a user is interacting with the web interface of the Netgear extender, he will be automatically redirected to the main configuration page, the moment he hits enter after typing mywifiext.net on the web address of a browser. To increase your convenience, Netgear has also provided you with a Netgear genie application that you can utilize through a mobile device to access your Netgear extender remotely from any corner of the entire world.

Why does mywifiext local not work in Netgear Wi-fi extender?

If a user is unable to access the mywifiext.local interface, he will be unable to perform various settings within his device. A user might receive a notification or error that gives the reason for denying you from accessing the web interface of the Netgear extender. Mywifiext.net is not a permanent internet website, that’s only a local address that a user uses to interact with his Netgear extender. Your computer or device must be connected to the internet with which you are trying to access the Netgear extender

Here are the troubleshooting steps to resolve the Mywifiext.local issue

If you are a new user who is connecting to mywifiext local for the time being, users are mostly recommended to use the Netgear Installation assistant to help you with the connection issue.
After your computer is successfully connected to the extender’s network, verify that the Link LED of your extender is solid white. You can also check the status of your connection through the Wi-fi connection manager and can check whether your device is still connected to the network of your extender or not.
Type 192.168.1.250 on the address bar of the browser which is the LAN IP address of your Netgear extender and press enter. If the IP address of your range extender doesn’t work, it may be the reason that your extender’s IP address has changed. You can log in to the router with which your extender is connected to view the IP address of your range extender.

Sometimes your browser gets piled up with the browsing history and caches a lot that it denies other websites to open in it. Clearing the cache memory and previous history of your browser might resolve the mywifiext local issue and you might be able to connect to your Netgear extender again.
Check that the browser in which you are trying to access the mywifiext.net interface of your Netgear extender is approved by the policy of the device or not. Only the approved browsers are allowed to access the mywifiext.net window such as Internet Explorer, Google Chrome, Mozilla Firefox, and safari in case you are using the MAC.
If your computer is using a static IP address then change it to a static one. Using the Dynamic IP address of the Internet can also be the reason that you may be denied access to the mywifiext local window.
Before you change any settings of the network in your extender, note down the MAC address and default gateway your extender is using. Use the IP address and subnet mask i.e 192.168.1.249 and 255.255.255.0 respectively.

Note: If any of the above troubleshooting steps won’t work you can contact the technical team of Netgear to help you out with the above issue. You can fetch the contact number of the Netgear support team from its official support website.

Netgear Extender Firmware Update mywifiext local

The firmware version your Netgear extender is using also determines its efficiency and performance level. Users are advised to update the firmware regularly whenever a new firmware version for your extender is available. Users are advised to read the release notes before updating the firmware of their extender so that they come to know of the configuration settings that are going to be removed after the update process. You can create a backup of those settings and cant restore them after the Firmware update using the mywifiext.net interface.

You must note down the model name and version number of your Netgear extender, the firmware of which you are going to download from the downloads section of the official support website of Netgear.
Before visiting the browser, go to the official support website of Netgear to download available firmware for your extender.
When you have downloaded the firmware for your extender, do not forget to keep the downloaded file in an extracted form. You can extract the file through WinRar or any other file extraction software available on your computer.
Open a browser on your mobile device or the computer to which the home network is connected.
Type www.mywifiext.local as the URL of the browser and if you encounter any error you also can type the IP address of the Netgear Extender. You can google out the IP address if you don’t know it.
Press the enter button and you will be redirected to the default login window of mywifiext.net
Type “admin” on the username tab as a default login username and mention “password” on the password tab as a default password tab. If you have changed the password after the Netgear Extender setup process, then mention it in place of the default credential on the Password tab.
After mentioning the credentials, click on the login button and the default menu page of wifiext.net appears on the screen.
Take your cursor to the Advanced tab, select the Advanced settings tab then click on the Firmware Update tab.
When you click on the Firmware update tab, the page displays on your screen.
If you want to manually update the firmware of your Netgear Extender then find the Browse button and click on it.
Take your cursor to the location where you have downloaded the new firmware file. Select the new firmware file as soon as you find it. Users are recommended to keep the downloaded firmware file in an extracted form so that a user finds convenience in fetching the file and uploading it to the mywifiext.net interface.
Select the file and click on the Upload button to initialize the firmware update process.
Do not interrupt the update by performing any unnecessary activity within your computer. Avoid closing off the browser, Do not turn off the extender, avoid turning your computer into sleep mode, Avoid opening a new browser or opening a new tab in a current browser.
Any activity within the computer during the update process may lead to failure in the Firmware update process.
Wait for a while to let the update process complete and your extender will get uploaded with new firmware.
Note: After the update process if you have created a backup of the configuration settings that are going to be removed after the update process, you can restore them using the mywifiext local window. Avoid downloading a default firmware version for your extender, as it may lead to permanent damage to your device and may also void the warranty of your range extender.

How to change the username and password of the Netgear Extender?

Username and password are those significant credentials of the Netgear Extender login window that allows a user to interact with the mywifiext.net window. Users who know the login credentials of the login window would only be able to adjust and configure various settings within the Netgear extender. The first time a user performs the login process, he has to use the default credentials on the login fields to get to the main configuration page of the mywifiext.net interface. After the setup process, a user can change the login credentials through the web interface of the Netgear extender

Steps to change the username and password of the Netgear extender

Open a browser on your mobile device or the computer with which you are trying to interact with the Netgear extender.
Make sure the device with which you are trying to interact with the Netgear extender is connected to the local network.
Take your cursor to the address bar and type mywifiext.net as the URL of your browser. Press the enter button and you will be redirected to the default Netgear extender login window. In case you get encountered with an error type the LAN IP address on the address bar of your browser.
Type login credentials on their respective fields. Mention “admin” on the username field and type the password that you have assigned during the setup process. If you haven’t changed the default password, mention “password” as the default credential.
When you are done typing the login credentials of the Netgear Extender login window and click on the login button.
The main menu of mywifiext local displays on your screen.
From the main navigation panel, locate the main menu and when you do, click on it. The extender menu gets displayed on your screen.
Select the Settings tab then go to the Password field. When you click on the Password settings tab, the Password settings page displays on your screen.
To change the username and password of the Netgear Extender login window, go to the Username field and type down a new email address in it.
To change the login password, take your cursor to the Password field. Type the password that you want to assign to the Netgear extender login window and retype it on the Verify password field.
To create a backup of the login password so that in the future if a user forgets it he can easily recover it using the mywifiext local interface. For the backup process, you must assign the security questions, the answers of which you are going to provide during the recovery process of the login password.
When you are done with configuring the settings, click on the Save button and the settings will get eventually saved.

Note: While assigning a security question during the backup process of the login password, make sure that the question and the answer is somehow relatable to you. It will increase the probability of giving the correct answer during the recovery process of the login password through the mywifiext.local interface. You can also note down the answers somewhere, which may also provide you the convenience of giving the correct answer to the security questions during the recovery process.